Function Key Features Function Keys - Page 45
IP Office (R3.0) 5620SW + EU24 User’s Guide Function Keys - Page 45
40DHB0002USEP – Issue 1 (13th January 2005) Function Key Features
IAuto - Automatic Intercom Connects call to the extension without ringing.
This function requires entry of an extension number when programmed. The target
extension must be support handsfree operation. This function cannot be programmed
through the phone by the user.
Press IAuto connects the call without any ringing at the remote extension. If the
target extension is busy or not available, the call will follow any forwarding or diversion
to voicemail set.
[User | Digital Telephony | Emulation | Automatic Intercom]
Sets the ringing pattern (sequence) used for internal calls.
This function is currently not supported on the 5620 telephone.
The same as IAuto - Automatic Intercom on page 45. This function cannot be
programmed through the phone by the user.
[User | Digital Telephony | Emulation | Dial Intercom]
Intrudes on a call in progress at the target extension.
This function is currently not supported on the 5620 telephone.
Intrudes on a call in progress at the target extension, creating a conference between
the callers and the intruding extension.
This function requires entry of the target extension number when programmed. The
Intru key shows the target extension number. This function cannot be programmed
through the phone by the user.
Pressing Intru intrudes on the call in progress.
Note: That the System Administrator must configure the intruding extension as being
able to intrude. Additionally none of the other extensions involved in the call can
have "Cannot be intruded on" status.
[User | Digital Telephony | Advanced | Call | Call Intrude]