Redial Last Number | 20AT Features – Page 5 |
20AT Features
Redial Last Number
Pressing the REDIAL key dials out the number of the last manually dialled call.
Changing the Caller Volume
During a call, pressing the VOLUME changes the caller volume between normal and loud.
Message Waiting Lamp
The 20AT has a voice message waiting lamp. On systems that support message waiting, the lamp will indicate when a message has been left. The method for answering the message and clearing the lamp will vary according to the system that left the message.
For the INDeX system:
To answer a message waiting lamp:
1.Lift the handset and dial *1. The system rings the extension that left the message.
To cancel a message waiting lamp:
1.Lift the handset and dial *2. Replace the handset.
The Memory Key
The 20AT's MEMORY key can store a single number for quick dialling (ie. lift the handset and press MEMORY). The number can be up to 21 digits.
Setting the memory number
1.Lift the handset
2.Press MUTE and then MEMORY.
3.Dial the number to store.
4.Press MUTE again and replace the handset.
Recall
Some telephone systems require a recall signal to initiate special functions (refer to your System Administrator for details). Press RECALL to send this signal.
INDeX 11.0 20AT Telephone User's Guide | 20AT Features – Page 5 |
38DHB0002UKHB Issue 1 (10/05/2004) | Redial Last Number |
