Avaya P333R-LB manual Replacing the Stacking Sub-module, Saving Configuration Definitions

Models: P333R-LB

1 218
Download 218 pages 57.22 Kb
Page 212
Image 212

Chapter 17

Maintenance

 

 

Saving Configuration Definitions

1Turn off the power supply.

2Remove an expansion sub-module.

3Insert another expansion sub-module.

4Turn on the power supply.

Without Saving Configuration Definitions

1Loosen the screws by turning the knobs.

2Take hold of the two knobs (one near each side of the front panel) and pull gently but firmly towards yourself.

3Insert another expansion sub-module or the blanking plate.

Replacing the Stacking Sub-module

To replace the X330STK stacking sub-module:

1Power to the switch may remain on.

2Loosen the screws to the stacking sub-module by turning the knobs.

3Take hold of the two knobs (one near each side of the front panel) and pull gently but firmly towards yourself.

4Insert the new stacking sub-module gently into the slot, ensuring that the metal base plate is aligned with the guide rails.

The metal plate—notthe PCB of the X330STK— fits onto the guide rails.

5Press the sub-module in firmly until it is completely inserted into the Avaya P330.

Caution: Ensure that the screws on the module are properly aligned with the holes in the chassis before tightening them.

6Gently tighten the two screws on the side panel of the stacking module by turning the screws. Do not use excessive force when tightening the screws.

70

Avaya P333R-LB User’s Guide

Page 212
Image 212
Avaya P333R-LB manual Replacing the Stacking Sub-module, Saving Configuration Definitions

P333R-LB specifications

The Avaya P333R-LB is a robust and versatile switch that is part of Avaya's portfolio aimed at enterprise networking solutions. This switch is designed to enhance the performance and scalability of network infrastructure while ensuring high availability and reliability.

One of the main features of the P333R-LB is its Layer 3 switching capability, which allows for efficient routing within an organization's network. This capability is particularly beneficial for organizations with multiple VLANs, as it simplifies the routing process and ensures that data packets are transmitted in the most efficient manner possible.

The P333R-LB is equipped with advanced Quality of Service (QoS) features to prioritize traffic based on the type of application being used. This ensures that critical applications, such as VoIP and video conferencing, receive the necessary bandwidth and low latency required for optimal performance. Additionally, it supports both IPv4 and IPv6 protocols, making it adaptable to a variety of networking environments.

Another important feature of the Avaya P333R-LB is its stackable design. This allows multiple switches to be interconnected, creating a single logical unit. This stacking capability not only simplifies management but also increases overall network capacity and redundancy. In case of a hardware failure, the stack can continue operating without interruption, maintaining network integrity and service continuity.

The switch also integrates advanced security features, including support for MAC filtering, access control lists, and port security. These features help to safeguard network resources from unauthorized access and potential threats. Moreover, the P333R-LB supports 802.1X port-based authentication, which adds an additional layer of security during user access to the network.

The Avaya P333R-LB comes with multiple Gigabit Ethernet ports, allowing for high-speed connectivity to devices such as servers, workstations, and IP phones. This ensures that all devices on the network can communicate effectively, supporting the demands of modern enterprise environments.

For management and monitoring, the P333R-LB offers a user-friendly web interface along with SNMP support, enabling network administrators to easily configure settings and monitor network performance. This simplicity in management is crucial for IT teams that need to ensure optimal network performance while minimizing downtime.

In summary, the Avaya P333R-LB is a feature-rich, scalable, and reliable switch that meets the needs of demanding enterprise networks. With its advanced technologies, QoS support, stackable design, robust security features, and high-speed connectivity options, the P333R-LB is positioned to support a wide range of applications and enhance overall network performance.