Manuals / Avaya / Computer Equipment / Switch

Avaya P333R-LB manual Maintenance, Adding/Replacing an Expansion Sub-module

Models: P333R-LB

1 218
Download 218 pages 57.22 Kb
Page 211
Image 211

Chapter 17

Maintenance

Introduction

This section provides basic maintenance information for the Avaya P330 switch and its components. For issues that are not covered in this chapter or in "Troubleshooting the Installation," please contact your Avaya representative.

Caution: Please refer to "Before You Install the P330" before undertaking any of the procedures detailed in this section.

Adding/Replacing an Expansion Sub-module

Caution: The expansion sub-modules contain components sensitive to electrostatic discharge. Do not touch the circuit board unless instructed to do so.

Adding an Expansion Sub-module to Avaya P330

1Remove the blanking plate or other sub-module (if installed).

2Insert the sub-module gently into the slot, ensuring that the Printed Circuit Board (PCB) is aligned with the guide rails.

The PCB not the metal base plate fits into the guide rail.

3Firmly press the sub-module until it is completely inserted into the Avaya P330.

4Gently tighten the two screws on the front panel of the expansion sub-module by turning them.

Note: The Avaya P330 switch must not be operated with the expansion slot open; the expansion sub-module slot should be covered with the supplied blanking plate if necessary.

Replacing an Existing Expansion Sub-module

If an expansion sub-module is removed from the stack with the power supply on, all configuration definitions on expansion sub-modules are lost. Both procedures for replacing an expansion sub-module—with saving and without saving configuration definitions —follow:

Avaya P333R-LB User’s Guide

69

Page 210 Page 212
Page 211
Image 211
Avaya P333R-LB manual Maintenance, Adding/Replacing an Expansion Sub-module, Adding an Expansion Sub-module to Avaya P330
Page 210 Page 212

P333R-LB specifications

The Avaya P333R-LB is a robust and versatile switch that is part of Avaya's portfolio aimed at enterprise networking solutions. This switch is designed to enhance the performance and scalability of network infrastructure while ensuring high availability and reliability.

One of the main features of the P333R-LB is its Layer 3 switching capability, which allows for efficient routing within an organization's network. This capability is particularly beneficial for organizations with multiple VLANs, as it simplifies the routing process and ensures that data packets are transmitted in the most efficient manner possible.

The P333R-LB is equipped with advanced Quality of Service (QoS) features to prioritize traffic based on the type of application being used. This ensures that critical applications, such as VoIP and video conferencing, receive the necessary bandwidth and low latency required for optimal performance. Additionally, it supports both IPv4 and IPv6 protocols, making it adaptable to a variety of networking environments.

Another important feature of the Avaya P333R-LB is its stackable design. This allows multiple switches to be interconnected, creating a single logical unit. This stacking capability not only simplifies management but also increases overall network capacity and redundancy. In case of a hardware failure, the stack can continue operating without interruption, maintaining network integrity and service continuity.

The switch also integrates advanced security features, including support for MAC filtering, access control lists, and port security. These features help to safeguard network resources from unauthorized access and potential threats. Moreover, the P333R-LB supports 802.1X port-based authentication, which adds an additional layer of security during user access to the network.

The Avaya P333R-LB comes with multiple Gigabit Ethernet ports, allowing for high-speed connectivity to devices such as servers, workstations, and IP phones. This ensures that all devices on the network can communicate effectively, supporting the demands of modern enterprise environments.

For management and monitoring, the P333R-LB offers a user-friendly web interface along with SNMP support, enabling network administrators to easily configure settings and monitor network performance. This simplicity in management is crucial for IT teams that need to ensure optimal network performance while minimizing downtime.

In summary, the Avaya P333R-LB is a feature-rich, scalable, and reliable switch that meets the needs of demanding enterprise networks. With its advanced technologies, QoS support, stackable design, robust security features, and high-speed connectivity options, the P333R-LB is positioned to support a wide range of applications and enhance overall network performance.