Avaya P333R-LB Establishing a Serial Connection, Configuring the Terminal Serial Port Parameters

Models: P333R-LB

1 218
Download 218 pages 57.22 Kb
Page 49
Image 49

Chapter 7

Establishing Switch Access

This chapter describes various methods for accessing the Avaya P330 CLI, including:

a terminal to the serial port on the switch

P330 Sessions

a workstation running a Telnet session connected via the network

a remote terminal/workstation attached via a modem (PPP connection)

Establishing a Serial Connection

This section describes the procedure for establishing switch access between a terminal and the Avaya P330 switch over the serial port provided on the front panel of the P330 (RJ-45 connector labeled "Console").

Configuring the Terminal Serial Port Parameters

The serial port settings for using a terminal or terminal emulator are as follows:

Baud Rate - 9600 bps

Data Bits - 8 bits

Parity - None

Stop Bit - 1

Flow Control - None

Terminal Emulation - VT-100

Connecting a Terminal to the Avaya P330 Serial port

Perform the following steps to connect a terminal to the Avaya P330 Switch Console port for acessing the text-based CLI:

1The P330 device is supplied with a console cable and a RJ-45-to-DB-9 adaptor. Use these items to connect the serial (COM) port on your PC/terminal to the Avaya P330 console port.

2Ensure that the serial port settings on the terminal are 9600 baud, 8 bits, 1 stop bit and no parity.

3When you are prompted for a Login Name, enter the default login. The default login is root.

4When you are promoted for a password, enter the user level password root.

Now you can establish a connection to the Router or the Master switch (indicated when the SYS front panel LED is ON) using the Session commands and begin the configuration of Module, Stack, or Router parameters.

Avaya P333R-LB User’s Guide

35

Page 49
Image 49
Avaya P333R-LB manual Establishing a Serial Connection, Configuring the Terminal Serial Port Parameters

P333R-LB specifications

The Avaya P333R-LB is a robust and versatile switch that is part of Avaya's portfolio aimed at enterprise networking solutions. This switch is designed to enhance the performance and scalability of network infrastructure while ensuring high availability and reliability.

One of the main features of the P333R-LB is its Layer 3 switching capability, which allows for efficient routing within an organization's network. This capability is particularly beneficial for organizations with multiple VLANs, as it simplifies the routing process and ensures that data packets are transmitted in the most efficient manner possible.

The P333R-LB is equipped with advanced Quality of Service (QoS) features to prioritize traffic based on the type of application being used. This ensures that critical applications, such as VoIP and video conferencing, receive the necessary bandwidth and low latency required for optimal performance. Additionally, it supports both IPv4 and IPv6 protocols, making it adaptable to a variety of networking environments.

Another important feature of the Avaya P333R-LB is its stackable design. This allows multiple switches to be interconnected, creating a single logical unit. This stacking capability not only simplifies management but also increases overall network capacity and redundancy. In case of a hardware failure, the stack can continue operating without interruption, maintaining network integrity and service continuity.

The switch also integrates advanced security features, including support for MAC filtering, access control lists, and port security. These features help to safeguard network resources from unauthorized access and potential threats. Moreover, the P333R-LB supports 802.1X port-based authentication, which adds an additional layer of security during user access to the network.

The Avaya P333R-LB comes with multiple Gigabit Ethernet ports, allowing for high-speed connectivity to devices such as servers, workstations, and IP phones. This ensures that all devices on the network can communicate effectively, supporting the demands of modern enterprise environments.

For management and monitoring, the P333R-LB offers a user-friendly web interface along with SNMP support, enabling network administrators to easily configure settings and monitor network performance. This simplicity in management is crucial for IT teams that need to ensure optimal network performance while minimizing downtime.

In summary, the Avaya P333R-LB is a feature-rich, scalable, and reliable switch that meets the needs of demanding enterprise networks. With its advanced technologies, QoS support, stackable design, robust security features, and high-speed connectivity options, the P333R-LB is positioned to support a wide range of applications and enhance overall network performance.