Avaya R3.0 manual Replacing the hard drive in an x305 IBM server, Task, Description, 2 of

Hardware Upgrade and Maintenance

Table 2: Tasks for replacing the hard drive in an x305 or x306 IBM server (continued)

9		Task	Description
	6	Power up the server	Plug the power cords into the server and RSA. Press the
			power-control button on the front of the server.
			Note: Wait at least 3 minutes for the server to complete
			its power up. Watch the power-on LED on the server
			(the green LED is on steady).
	7	Reconnect attached	Reconnect all attached devices, including the laptop and
		devices	the external flashcard reader (if used).
			2 of 2

Replacing the hard drive in an x305 IBM server

This procedure consists of the following steps:

1.Removing the cover of the x305 IBM server

2.Removing the hard drive from the x305 IBM server

3.Installing the new hard drive in the x305 IBM server

4.Replacing the cover of the x305 IBM server

Removing the cover of the x305 IBM server

To remove the server cover:

Note:

Read General safety guidelines and Handling static sensitive devices.

1.With the server extended on the slide rails, loosen the 2 captive screws on the back of the server that hold the top in place. See Figure 1.

14 Secure Services Gateway (SSG) Maintenance Guide