AVerMedia AVerKey500 Pro User’s Manual
Installing AVerKey500 Pro to an IBM PC
Follow the setup diagram and procedure below to install the AVerKey500 Pro to an IBM compatible PC.
¬Connect the AVerKey500 Pro to the PC. Plug one end of the supplied Computer Extension Cable to the AVerKey500 Pro “VGA IN” port and the other end to the PC’s VGA port.
Connect the VGA monitor to AVerKey500 Pro. Plug the VGA monitor cable to the AVerKey500 Pro “MONITOR” port.
®If you are using a SCART RGB monitor, connect it to the AVerKey500 Pro “SCART RGB” port by using the SCART RGB Cable.
(Note : The SCART RGB cable is an optional accessory cable supplied with the AVerKey500 Pro.)
¯Plug the supplied AC Power Adapter into the AVerKey500 Pro “POWER” port.
8