AVerMedia Technologies 500 Hardware Installation and Setup

Chapter 2

Hardware Installation and Setup

This chapter will show you how to install the AVerKey500 Pro to an IBM compatible PC, Macintosh computer and NEC 98 PC.

The Back Panel

The ports on the back panel of the AVerKey500 Pro are for connecting the converter to the computer and graphics display monitor. The figure and descriptions below specify what device should go into each port.

¬

­

POWER : Plug the AC Power Adapter to this port.

VGA IN : For IBM PC or compatible :

This port connects the AVerKey500 Pro to the IBM compatible PC’s VGA port via the supplied Computer Extension Cable.

For Macintosh :

This port connects the AVerKey500 Pro to the Macintosh PC’s display card via the Computer Adapter and Computer Extension Cable. (The Computer Adapter is provided as an optional accessory.)

6