Chapter 2 Hardware Installation and Setup

Connecting a Wired Mouse

The AVerKey500 Pro remote control already provides a remote mouse which allows you to control your presentations.

If you still need to use a wired mouse, make sure it is Microsoft compatible. If you have an IBM PC mouse or another mouse type, check if it can be switched to Microsoft mouse mode.

Follow the diagram and instructions below to connect a wired mouse to the AVerKey500 Pro.

PS2 Mouse

 

 

PS2

 

2

PS2

Cable

 

3

 

Cable

 

 

 

 

15-pin

15-pin

 

 

female

male

 

 

connector

connector

 

OR

 

 

OR

 

15-pin

15-pin

 

 

female

male

 

 

connector

connector

 

2

RS-232

RS-232

3

Cable

Serial Mouse

 

Cable

 

 

 

¬Plug the supplied RS-232 or PS2 Cable to the AVerKey500 Pro “MOUSE/ADB” port.

­Disconnect your wired mouse from the PC and plug the mouse to the other end of the RS-232 or PS2 Cable.

®Connect the other RS-232 or PS2 Cable to the AVerKey500 Pro “PC/ADB” port and the PC's serial or PS2 port.

9