AVerMedia Technologies 500 manual 31

AVerMedia AVerKey500 Pro User’s Manual

Panning to Other Parts of the Zoomed Image

1.Check and see if the PAN/POS LED on the AVerKey500 Pro front panel is OFF. If it's not, press the PAN/POS button to switch to PAN mode.

2.Press on the Directional Buttons to view other parts of the zoomed image.

Adjusting the Image Position

1.Check and see if the PAN/POS LED on the AVerKey500 Pro front panel is ON. If it's not, press the PAN/POS button to switch to POS mode.

2.Press on the Directional Buttons to move the image up, down, left, or right.

The LED Panel

At the front panel of the AVerKey500 Pro, you will find the Infrared Sensor and several LEDs. Each LED shows you whether or not a particular function or operating mode is active. The figure and descriptions below explain what each LED represents.

28