AVerMedia AVerKey500 Pro User’s Manual

Connecting a TV Monitor and Video Source

Use the connectors at the side panel of the AVerKey500 Pro to connect a TV monitor (or any video monitor). If you have a video source such as a VCR, laserdisc player or video camera originally connected to your TV monitor, you can also connect the video source to the AVerKey500 Pro.

To output your computer presentation to a TV monitor :

¬

­

S-OUT : If you have a TV monitor that uses the S-video standard, connect the supplied S-Video Cable to the AVerKey500 Pro "S-OUT" port and the TV monitor's "S-IN" port.

VIDEO-OUT : If you have a TV monitor that uses the Composite video standard, connect the supplied AV Cable to the AVerKey500 Pro "VIDEO-OUT" port and the TV monitor's "VIDEO-IN" port.

Refer also to the setup diagram on the next page for the proper cable connections.

To use the AVerKey500 Pro as a Video Switcher :

The AVerKey500 Pro allows you to connect a computer and a video device such as the VCR or LaserDisc Player. You can then use the AVerKey500 Pro as a Video Switcher to select either source to be the final output. Environments such as classrooms and conference rooms usually require a TV to be connected to a VCR at all times. Now with the AVerKey500 Pro, you do not need to disconnect cables whenever you need to use the TV with either the computer or the VCR/LaserDisc.

To connect the AVerKey500 Pro to a VCR or any video source :

®S-IN : If the VCR (or any video source) is originally attached to your TV monitor and it uses the S-video standard, use an S- Video Cable to connect the VCR to the AVerKey500 Pro "S-IN" port and the TV monitor's "S-OUT" port.

¯VIDEO-IN : If a VCR (or any video source) is originally attached to the TV monitor and it uses the Composite video standard, use an AV Cable to connect the VCR to the AVerKey500 Pro "VIDEO-IN" port and the TV monitor's "VIDEO-OUT" port.

Refer also to the setup diagram on the next page.

12