Avocent Setting up a Scan Pattern, To access the Scan dialog box:, To scan all servers in the system:, Preemptive, Down Arrow, Print Screen

Chapter 3: Basic Operations 27

Preemptive to have the OutLook allow any user to select any server at any time; a request from another user disconnects the current user.

2.Click OK.

Setting up a Scan Pattern

In scan mode, the switch automatically scans from port to port (server to server). Each user can scan the entire system sequentially or designate a custom scan pattern by specifying servers and durations.

To access the Scan dialog box:

1.Press Print Screen. The Main dialog box will appear.

2Click Setup in the Main dialog box. The Setup dialog box appears.

3.Click Scan in the Setup dialog box. The Scan dialog box appears.

Figure 3.5: Scan Dialog Box

To scan all servers in the system:

1.Click Defaults in the Scan dialog box.

2.In the Sec column, type the number of seconds (from 1 to 99) of desired Delay Time before the scan moves to the next server in the sequence.

3.Move the cursor to the next line or press the Down Arrow and repeat step 2 for each server.

4.Click OK.

5.From the Commands menu, select Scan Enabled to start the scan mode.