Avocent Setting User Console Security, To access the Security dialog box:, To set or change the password:, NOTE:, Figure 3.7: Position Flag

30OutLook ES Series Installer/User Guide

5.To position the status flag on the desktop:

a. Click Set Position to gain access to the Position Flag screen.

Figure 3.7: Position Flag

b.Left click on the title bar and drag to the desired location.

c.Right click to return to the Flag dialog box.

NOTE: Changes made to the flag position are not saved until you click OK in the Flag dialog box.

6.Click OK to save settings or click X to exit without saving changes.

Setting User Console Security

Use the Security dialog box to set security on your user station. You can establish a screen saver mode that engages after your station remains inactive for a user-specified time. Once engaged, your station will remain locked until you press any key or move the mouse. You will then need to type in your password to log back in to the system.

To access the Security dialog box:

1.Press Print Screen. The Main dialog box will appear.

2.Click Setup - Security. The Security dialog box appears.

Figure 3.8: Security Dialog Box

To set or change the password:

1.Single-click and press Enter or double-click in the New text box.

2.Type the new password in the New text box and press Enter.