Avocent CCM1640, CCM840 Port Alert Copy command, Port Alert Delete command

Chapter 5: CCM Commands 55

Port Alert Add Command Parameters

Parameter	Description
<port>	Port number in the range 1-8 for a CCM840 or 1-16 for a CCM1640.
<string>	3-32 character string.

Port Alert Copy command

The Port Alert Copy command copies the alert strings from one port (from_port) to another (to_port). Any alert strings that were previously defined on the to_port will be deleted. When you enter this command, you are prompted to confirm or cancel the copy operation.

For more information, see Managing the CCM Using SNMP in Chapter 3.

Access right: SCON or PCON

Access level: ADMIN or APPLIANCEADMIN

Syntax

PORT <to_port> ALERT COPY <from_port>

Port Alert Copy Command Parameters

Parameter	Description
<to_port>	Port number where alert strings will be copied, in the range 1-8 for a
	CCM840 or 1-16 for a CCM1640.
<from_port>	Port number from which alert strings will be copied, in the range 1-8
	for a CCM840 or 1-16 for a CCM1640.

Example

The following command copies the alert strings defined on port 1 to port 7, replacing any previously-defined alert strings on port 7.

port 7 alert copy 1

Port Alert Delete command

The Port Alert Delete command deletes one or more alert strings from a port. When you issue this command, a numbered list of defined alert strings is displayed, from which you choose those to be deleted. You may enter one or more numbers separated by commas, a range of numbers separated by a hyphen or type ALL to specify all strings. Pressing Enter cancels the command.

For more information, see Managing the CCM Using SNMP in Chapter 3.

Access right: SCON or PCON

Access level: ADMIN or APPLIANCEADMIN