![](/images/backgrounds/142342/142342-10068x1.png)
62CCM840/1640 Installer/User Guide
Server CLI Command Parameters (Continued)
Parameter | Description |
CHAR=^<char> | CLI access character in the range A through _ (underscore). (The |
| allowable ASCII range is |
| access character, when pressed simultaneously with the Ctrl key |
| during a session with an attached serial device, will suspend the |
| session with the device and place you in CLI command mode. |
| This value will be used if a port’s Port Set command contains a |
| Char=None parameter. |
| Default = ^d is the manufacturing default |
|
|
CONNECT=ONOFF | Enables or disables the ability to use the Connect command from |
| the serial CLI port. When enabled, a serial CLI user may use the |
| Connect command to establish a connection to the serial device |
| attached to another CCM serial port. When disabled, you cannot |
| use the Connect command from the serial CLI port. |
| Default = ON |
|
|
HISTORY= | Port history file processing options during connection (Hold or Auto) |
HOLDAUTO, | and when a session ends (Clear or Keep): |
CLEARKEEP | When Hold is specified, upon connection you are informed of how |
| much data is in the history buffer, but the data is not displayed. |
| When Auto is specified, upon connection you are informed of how |
| much data is in the history buffer, and it is then displayed. |
| When Clear is specified, the history buffer’s content is cleared when |
| a session ends. |
| When Keep is specified, the history buffer’s content is retained |
| when a session ends. You cannot specify both Clear and Keep or |
| both Hold and Auto. |
| Default = HOLD,CLEAR |
|
|
MODEMINIT= | Modem initialization string, enclosed in quotation marks. Must |
“<string>” | contain at least ATV1 and SØ=1. |
| Default = “” (no modem is attached to serial CLI port) |
|
|
Number of | |
| or transmitted during a Telnet session for the specified period, the |
| session will |
| used for any CCM port that does not have a |
| the Port Set command, during a Telnet session to port 23 or an SSH |
| session to port 22. |
| Default = 15 minutes is the manufacturing default |
|
|
Server FLASH command
The Server FLASH command updates the CCM program images in FLASH memory. You may wish to use this command to update the program with new features or to install a later release of the program.
There are two program images that you may update in the CCM FLASH. The boot image file (ccm40bt.img) contains the CCM startup and