Avocent CCM1640, CCM840 Quit Command, Resume Command, Server Commands, Server Command Summary

60CCM840/1640 Installer/User Guide

Example

The following command sets a baud rate of 57600 and enables XON/XOFF flow control on port 2.

> port 2 set baud=57600 flow=xonxof

Quit Command

The Quit command terminates the current CCM session and terminates your

Telnet connection to the CCM.

Access right: none needed

Access level: all

Syntax

QUIT

Resume Command

The Resume command exits the CLI and resumes your connection to the attached serial device. The history buffer contains any data received while you were in CLI mode.

Access right: none needed

Access level: all

Syntax

RESUME

Server Commands

The Server command has several forms.

Server Command Summary

Command	Description
Server CLI	Specifies the serial CLI port, type and access character;
	modem initialization string; port history mode operations
	and port time-out value. It also enables/disables device
	connection from the CLI port.
Server FLASH	Updates the CCM program FLASH.
Server PPP	Enables/disables PPP connections to the serial CLI port.
Server RADIUS	Specifies RADIUS parameters.
Server Reboot	Reboots the CCM.