Avocent CCM1640, CCM840 Server RADIUS command

64CCM840/1640 Installer/User Guide

Server PPP Command Parameters

Parameter	Description
DISABLE	Disables the PPP server.

ENABLE	Enables the PPP server.

LOCALIP=<local_ip>	IP address to be used to connect the CCM over the PPP
	connection. Must be on same subnet as REMOTEIP address.

REMOTEIP=<rem_ip>	IP address to assign to the PPP client end of the PPP connection.
	Must be on same subnet as LOCALIP address.

MASK=<subnet>	LAN subnet for the PPP dial-in client.

Examples

The following command enables the PPP server with a local IP address of 192.168.0.1, a remote IP address of 192.168.0.2 and a subnet mask of 255.255.255.0.

> ser ppp ena loc=192.168.0.1 rem=192.168.0.2 mas=255.255.255.0

The following command enables the PPP server with previously-configured IP and subnet mask values. This form of the command would not be valid unless the IP and subnet mask values had been previously configured.

> server ppp enable

Server RADIUS command

The Server RADIUS command defines or deletes RADIUS parameters for the

CCM RADIUS client. For more information, see RADIUS authentication in

Chapter 3.

When you enter this command, you are prompted to confirm or cancel the specified changes.

Access right: SCON

Access level: APPLIANCEADMIN

Syntax

SERVER RADIUS PRIMARYSECONDARY

IP=<radius_ip> SECRET=<secret> USER-RIGHTS=<attr> [AUTHPORT=<udp>] [TIMEOUT=<time-out>] [RETRIES=<retry>]

- or -

SERVER RADIUS PRIMARYSECONDARY DELETE

Contents

Page Page Page Page Table of Contents Page 1 Product Overview Page Chapter 1: Product Overview Features and Benefits Safety Precautions Rack mount safety considerations Using AVWorks Page Installation and Configuration Page Chapter 2: Installation and Configuration Hardware Overview Installing the CCM Configuring the CCM Configuring the IP address and subnet mask To conﬁgure the IP address and subnet mask using a Telnet CLI: To conﬁgure the CCM using the serial CLI: Initial CCM login Reinitializing the CCM 3 Operations Page Chapter 3: Operations Overview Configuring Serial Port Settings Connecting to Serial Devices Connecting to devices using Telnet Connecting to devices from the serial CLI port Configuring and using dial-inconnections Connecting to devices using PPP Connecting to devices using SSH SSH Authentication Methods Page Enabling plain text Telnet and SSH connections Telnet CLI mode Ending device sessions Session time-outs Managing User Accounts To change a user’s conﬁguration information: To end another user’s CCM session: To delete a user: To display user conﬁguration information: Access rights and levels Using Authentication Modes Authentication summary Using Security Lock-out Managing the Port History Buffer Using port history mode commands Port History Mode Commands To access port history mode: To control the port history buffer display when you connect: To control the port history buffer content when you end a session: To clear and discard all data in a port history buffer: Managing the CCM Using SNMP To add or delete SNMP management entity addresses: To enable or disable SNMP traps: To add or delete SNMP trap destination addresses: To add, copy or delete port alert strings: To display SNMP conﬁguration information: To display port alert string information: 4 Using CCM Commands Page Chapter 4: Using CCM Commands Accessing the CLI Entering Commands When commands take effect Understanding Conventions Command syntax Page Syntax conventions Command Summary CCM Command Summary (Continued) Page Page Page 5 CCM Commands Page Chapter 5: CCM Commands Connect Command Disconnect Command Help Command Port Commands Port Alert Add command Port Alert Copy command Port Alert Delete command Port Break command Port History command Port Logout command Port Set command Page Quit Command Resume Command Server Commands Server CLI command Server FLASH command Server PPP command Server RADIUS command Server Reboot command Server Security command Server Set command Server SNMP command Server SNMP Community command Server SNMP Manager command Server SNMP Trap command Server SNMP Trap Destination command Server SSH command Show Commands Show Port command Page Show Port Alert command Show Server command Show Server CLI command Show Server PPP command Show Server RADIUS command Show Server Security command Show Server SNMP command Show User command SPC Command User Commands User Add command Page User Delete command User Logout command User Set command User Unlock command Page Appendices Page Appendices Appendix A: Technical Specifications Appendix B: Device Cabling Page RJ-45modular adaptors and cables Page Appendix C: Ports Used Appendix D: Technical Support