Adjusting the View, To align the mouse cursors | Avocent DSR1021

60DSR1021/1022 Switch Installer/User Guide

Adjusting the View

Using menus or Task buttons in the Video Viewer window, you can do the following:

•Align the mouse cursors.

•Refresh the screen.

•Enable or disable Full Screen mode. When Full Screen mode is enabled, the image adjusts to fit the desktop up to a size of 1024 x 768. If the desktop has a higher resolution, the following occurs:

•The full-screen image is centered in the desktop, and the areas surrounding the Video Viewer window are black.

•The menu and toolbar are locked so that they are visible at all times.

•Enable automatic, full or manual scaling of the session image:

•With full scaling, the desktop window remains fixed and the device image scales to fit the window.

•With automatic scaling, the desktop window is sized to match the resolution of the server being viewed.

•With manual scaling, a drop-down menu of supported image scaling resolutions is displayed.

•Change the color depth of the session image.

To align the mouse cursors:

Click the Align Local Cursor button in the Video Viewer window toolbar. The local cursor should align with the cursor on the remote device.

NOTE: If cursors drift out of alignment, turn off mouse acceleration in the attached device.

To refresh the screen:

Click the Refresh Image button in the Video Viewer window. -or-

Select View - Refresh from the Video Viewer window menu.

The digitized video image is completely regenerated.

Image 72

Avocent DSR1021 manual Adjusting the View, To align the mouse cursors, To refresh the screen

Contents

DSR Switch Power on DSR1021/1022 Switch USA Notification Japanese Approvals Safety and EMC Standards Table of Contents Local Port Operation Terminal Operations Index List of Figures Viii DSR1021/1022 Switch Installer/User Guide List of Tables DSR1021/1022 Switch Installer/User Guide Features and Benefits Reduce cable bulk Access the DSR1021/1022 switch via network connection Two modes of access to the DSR1021/1022 switchSimple access to any target device DSR1021/1022 switch Ethernet DSView Modem Safety Precautions Rack Mount Safety Considerations Installation DSR 1021/1022 Switch Connectivity Installation Overview Setting up your networkInstalling the DSR1021/1022 switch Digital User Ethernet CordConnections Connecting the DSR1021/1022 Switch Hardware Items supplied with the DSR1021/1022 switchTo connect and power on your DSR1021/1022 switch Getting Started To connect a Dsriq module to a server DSR1021/1022 switch Verifying the ConnectionsTo connect a Dsriq module to a serial device Configuring the Web Server and DSView 3 Software Adjusting Mouse Settings on Target DevicesSetting up the built-in web server Setting Up the DSView Software Microsoft Windows Click the Pointer Options tab Linux Installation 16 DSR1021/1022 Switch Installer/User Guide Unix 18 DSR1021/1022 Switch Installer/User Guide Novell NetWare Apple Mac OS To access the Oscar interface Main dialog box Controlling Your System at the Local PortViewing and Selecting Ports and Servers Viewing the status of your DSR1021/1022 switching system Selecting target devicesTo select target devices Soft switching To configure the Oscar interface screen delayTo soft switch to a target device To select the previous target device Navigating the Oscar Interface Escape Configuring Oscar Interface Menus Local Port Operation To access the Oscar interface Setup dialog box To access the Oscar interface Names dialog boxAssigning target device names To assign names to target devices Names Dialog Box To access the Oscar interface Devices dialog box Assigning device typesTo list target devices alphabetically by name Changing the display behavior To assign a device type To access the Oscar interface Menu dialog box To choose the display order of target devices To set a Screen Delay Time for the Oscar interface To access the Oscar interface Flag dialog boxControlling the status flag To determine how the status flag is displayed Flag Dialog Box To access the Oscar interface Broadcast dialog box Broadcasting to target devices Using Scan mode To broadcast to selected target devicesTo turn off Broadcasting To add target devices to the Scan list 11 Scan Dialog Box To start the Scan mode To remove a target device from the Scan list Setting local port Screen Saver options To cancel Scan modeTo access the Oscar interface Screen Saver dialog box To exit Screen Saver mode and log in to the local port To set the Screen Saver options Setting the keyboard country code To immediately turn on the screen saverTo set the keyboard country code for Sun servers 40 DSR1021/1022 Switch Installer/User Guide Managing Server Tasks Using the Oscar Interface To access the Oscar interface Commands dialog box Viewing and disconnecting user connections To view current user connectionsTo disconnect a user Resetting your PS/2 keyboard and mouse To reset the PS/2 mouse and keyboard values Displaying version information To display version information Click X to close the Dsriq Version dialog box 46 DSR1021/1022 Switch Installer/User Guide Overview of the DSR1021/1022 Web Server To log in to the DSR web server About the DSR Explorer Window Describes some of the DSR Explorer window areas Using the side navigation bar Using the top option barBookmarking a window Internet Explorer only Logging Out Launching a KVM session To disconnect an active KVM session Administrator only Rebooting the applianceTo reboot the DSR1021/1022 switch remotely Managing a DSR web server device Managing Local Accounts Viewing and changing appliance configuration information Managing Device Properties Power Controlling Target Devices About the Video Viewer Window Video Viewer minimum requirements To enable, disable or configure the session time-out Launching a KVM SessionSession time-out Video Viewer Window Features Video Viewer Window Normal Window Mode 58 DSR1021/1022 Switch Installer/User Guide Setting the Window Size To change the Video Viewer window resolutionChanging the toolbar To specify a toolbar hide time Adjusting the View To align the mouse cursorsTo refresh the screen Adjusting color depth To enable or disable full screen modeTo enable automatic, full or manual scaling Additional Video Adjustment To manually adjust the video quality of the window Contrast and brightness Detection thresholds Adjusting Mouse Options Automatic video adjustmentBlock noise threshold and pixel noise threshold Refresh image To enter single cursor mode Cursor Type To select a key for exiting single cursor mode To exit single cursor modeTo change the mouse cursor setting Mouse Scaling Using Keyboard Pass-through Mouse Alignment and SynchronizationTo realign the mouse Using Macros Saving the View Closing a Video Viewer Window Session To close a Video Viewer window session 70 DSR1021/1022 Switch Installer/User Guide Network Configuration To configure network settings using the Console menuConsole Menu 72 DSR1021/1022 Switch Installer/User Guide Terminal Operations Security Configuration To add a user to the DSR1021/1022 switch databaseOther Console Main Menu Options Local User Accounts Console Password Reset CertificatesTo rename a user in the DSR1021/1022 switch database To remove a user from the DSR1021/1022 switch database Secure Mode Enable Debug MessagesRestore Factory Defaults Reset Appliance Appendix a Flash Upgrades Appendices 78 DSR1021/1022 Switch Installer/User Guide Appendix B Using DSView Software Over a Modem Connection Before you begin Appendix C Using DSRIQ-SRL Modules DSRIQ-SRL module modes Ctrl-F8 To configure a DSRIQ-SRL module Creating a DSRIQ-SRL module macroTo create a macro To use History mode DSRIQ-SRL module pinouts Appendix D UTP Cabling UTP copper cabling Cabling installation, maintenance and safety tips Appendix E Technical Specifications Table E.1 DSR1021/1022 Switch Product Specifications Type Serial RS-232 Connectors DB9 Male Appendix F Sun Advanced Key Emulation Appendices Appendix G Technical Support Index Numerics Module 7, 8, 9, 10, 11, 51, 77, 80 Mode 81, 82 PPP Status LED 96 DSR1021/1022 Switch Installer/User Guide Page 590-427-501B