2DSR1021/1022 Switch Installer/User Guide
The DSRIQ module is powered directly from the target device and provides Keep Alive functionality when the DSR1021/1022 switch is not powered.
The
Access the DSR1021/1022 switch via network connection
No special software or drivers are required on the attached, or client, computers.
NOTE: The client connects to the server housing the DSView® management software using an Internet browser. For modem access, you must install DSR Remote Operations software included on the DSView 3 software
Users access the DSR1021/1022 switch and all attached systems via Ethernet or using a V.34, V.90 or V.92 modem from a client computer, such as a PC. Clients can be located anywhere a valid network connection exists.
Two modes of access to the DSR1021/1022 switch
You can access the DSR1021/1022 switch in one of the following ways:
•through a
•as your needs grow, by upgrading to the DSView 3 software to manage every KVM switch in your installation from one
Simple access to any target device
When a user accesses the DSR1021/1022 switch, a listing displays all target devices to which the user has permission to view and manage. When a user selects a target device from the list, the video of the selected target device displays in a Video Viewer window. For more information about the Video Viewer, see Chapter 5.