Axiom Audio Axiom 61 Example of Control Functionality, Setting Toggle Values for the Buttons

Axiom Line User Guide

3.8Example of Control Functionality

3.8.1Setting Toggle Values for the Buttons

The assignable buttons and the pedals can each be assigned to toggle between two MIDI controller message values.You may for example want to send out value 15 when you first press the button followed by value 74 when you press the button for a second time.

Setting up a toggle effect:

49- and 61-note versions:

<Select the button or pedal to edit.

<Press the Data 2 button.

<Type in “015” using the numeric keypad. This sets the OFF position value.

<Press the Data 3 button.

<Type in “074” using the numeric keypad. This sets ON position value.

25-note version:

<Select the button or pedal to edit.

<Press the Advanced button.

<Press the Data 2 key.

<Type in “15” using the numeric data entry keys.

<Press the Enter key to confirm. This sets the OFF position value.

<Press the Advanced button again.

<Press the Data 3 key

<Type in ‘074’ using the numeric data entry keys.

<Press the Enter key to confirm. This sets ON position value.

If you want the button to send the same value every time you press it, simply set the same value for both Data 2 and Data 3.

The above method toggles the button each time you press it. It is also possible to set the button to send one value when you press it, and another value when you release it.

Setting up an alternating value effect:

49- and 61-note versions:

<Select the button or pedal to edit.

<Press the Ctrl Assign button.

<Type in “146” using the numeric keypad. This sets the button up for MIDI CC (On/Off) mode, as shown in Appendix E.

<Assign the OFF and ON value using Data 2 (for off value) and Data 3 (for on value) respectively, as detailed in section 3.8.1.

25-note version:

<Select the button or pedal to edit.

<Press the Advanced button.

<Press the Ctrl Assign key.

<Type in “146” using the numeric data entry keys

<Press the Enter key to confirm. This sets the button up for MIDI CC (On/Off) mode, as shown in Appendix E.

<Assign the OFF and ON value using Data 2 (for off value) and Data 3 (for on value) respectively, as detailed in section 3.8.1.

29

English