Axiom Line User Guide
In order to program one of these methods to the rotary encoders on your Axiom, you should assign the MIDI controllers given below:
MIDI CC | Endless Data Method | Increment | Decrement |
|
|
|
|
145 | Program Change Increment/Decrement | — | — |
|
|
|
|
146 | 2’s Complement from 64 / Relative (Binary Offset) | 065 to 127 | 063 to 000 |
|
|
|
|
147 | 2’s Complement from 0 / Relative (2’s Complement) | 001 to 64 | 127 to 065 |
|
|
|
|
148 | Sign Magnitude / Relative (Signed Bit) | 065 to 127 | 001 to 063 |
|
|
|
|
149 | Sign Magnitude / Relative (Signed Bit 2) | 001 to 063 | 065 to 127 |
|
|
|
|
150 | Single Value Increment/Decrement | 096 | 097 |
|
|
|
|
151 | RPN Increment/Decrement Message | 096 then 000 to 127 | 097 then 000 to 127 |
|
|
|
|
152 | NRPN Increment/Decrement Message | 096 then 000 to 127 | 097 then 000 to 127 |
|
|
|
|
To Assign the Rotary Encoders:
49- and 61-note versions:
<Select the rotary encoder as explained in section 2.
<Press the Ctrl Assign button. The LCD shows the encoder’s current controller assignment.
<Decide which endless data method you want from the table above, and enter its MIDI CC number using the numeric keypad.
<Press Data 2. The LCD display flashes the encoder’s current data parameter.
<Enter the MIDI controller number from Appendix C that you want. (Note that the range in this case is
<The encoder will now transmit increment/decrement messages on the MIDI controller you have set.
<Select the rotary encoder as explained in section 2.
<Press the Advanced button.
<Press the Ctrl Assign key. The LCD will show the encoder’s current controller assignment.
<Decide which endless data method you require from the table above, and enter its MIDI CC number using the numeric data entry keys.
<Press the Enter key to confirm.
<Press the Advanced button again.
<Press the Data 2 key.The LCD display will show the encoder’s current data parameter..
<Enter the MIDI controller number from Appendix C that you want. (Note that the range in this case is
<Press the Enter key to confirm.
<The encoder will now transmit increment/decrement messages on the MIDI controller you have set.
19
English
