AXIS 211M - Event Configuration
Object size, history and sensitivity:
| Object Size | History | Sensitivity |
|
|
|
|
High level | Only very large objects | An object that appears in the region will trigger | Ordinary colored objects on ordinary back- |
| trigger motion detection | the motion detection for a long period | grounds will trigger the motion detection |
|
|
|
|
Low level | Even very small objects | An object that appears in the region will trigger | Only very bright objects on a dark back- |
| trigger motion detection | motion detection for only a very short period | ground will trigger motion detection |
|
|
|
|
Default value | Low | Medium to High | Medium to High |
|
|
|
|
Examples:
•Avoid triggering on small objects in the video image by setting the object size level to high.
•To reduce the number of triggers if there is a lot of movement during a short period of time, select a high history level.
•To only detect flashing light, low sensitivity can be selected. In other cases, a high sensitivity level is recommended.
Port Status
Under Event Configuration > Port Status there is a list showing the status for the camera’s input and output. This is for the benefit of Operators, who cannot access the System Options section.
Example: If the Normal state for a door push button connected to an input is set to Open circuit - as long as the button is not pushed, the state will be inactive. If the doorbell button is pushed, the state of the input changes to active.
Please see the online help 
for descriptions of each available option.
25
