Bakers Pride Oven MT-200 Outer Coverings, Bulb, Heating Element and Motor Fan, 30W Motor

Models: MT-200

1 24
Download 24 pages 10.94 Kb
Page 18
Image 18
Outer Coverings

Convection Oven

Maintenance

 

 

Outer Coverings

Remove the 4 rear fastening screws “C”.

Bulb, Heating Element and Motor Fan

It is necessary to access the inside of the oven, first removing pans, racks and related supports, and then the conveyor.

30W Motor

Remove the fan by following the procedure outlined above, disconnect the motor from the electrical system, loosen the 4 screws and replace the motor. Before re-installing the fan, check that there is no friction between the motor shaft and the ring nut located inside the oven. If there is, loosen the fixing screws of the ring nut and re-tighten them after eliminating the friction and having centered the ring nut on the motor shaft.

Heating Elements

Disconnect the heating element connections outside the oven chamber. Loosen the heating elements from inside the oven chamber and replace them.

16

Page 18
Image 18
Bakers Pride Oven MT-200 Outer Coverings, Bulb, Heating Element and Motor Fan, 30W Motor, Heating Elements, Maintenance