Bakers Pride Oven MT-200 Introduction, Safety Precautions, Safety Signs and Messages

Convection Oven Introduction

Introduction

Thank you for purchasing our convection oven. We feel certain that the oven you have purchased will meet your expectations, and will be a trustworthy assistant in your work for a long time to come, providing performance of the highest levels. You will also receive efficient and timely after-sales technical and operational service. Your oven is quick and easy to install. Nonetheless, please CAREFULLY read this manual, and keep it for future use. We hope you enjoy your work!

PLEASE READ THIS ENTIRE MANUAL BEFORE OPERATING THE UNIT. If you have any questions, please contact your BKI Distributor. If they are unable to answer your questions, contact the BKI Technical Service Department, toll free:

1-800-927-6887. Outside the U.S., call 1-864-963-3471.

Safety Precautions

Always follow recommended safety precautions listed in this manual. Below is the safety alert symbol. When you see this symbol on your equipment, be alert to the potential for personal injury or property damage.

Safety Signs and Messages

The following Safety signs and messages are placed in this manual to provide instructions and identify specific areas where potential hazards exist and special precautions should be taken. Know and understand the meaning of these instructions, signs, and messages. Damage to the equipment, death or serious injury to you or other persons may result if these messages are not followed.

This message indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

This message indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

This message indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

This message is used when special information, instructions or identification are required relating to procedures, equipment, tools, capacities and other special data.

2