Bakers Pride Oven MT-200 service manual Electro-Mechanical Controls, Chamber Face Gasket

Convection Oven Maintenance

Electro-Mechanical Controls

All the electric components are visible. To replace them it is necessary to disconnect the attachments, remove the knobs, unscrew the fastening screws or nuts and replace them.

For the adjustable thermostat, safety thermostat and thermometer, unscrew the guard and the supports and remove the bulbs. Once they have been replaced use high-temperature resistant silicone to seal the holes. After replacement, reseal the holes for the passage of the capillaries with high temperature silicone.

Chamber Face Gasket

It is simply pressed in. Pull to remove it. NB: Before removing it, note its position carefully so as to place the new one in the same position.

Replacement of Chamber Light and Glass Gasket

Check and replace the glass gasket and any lights in the oven chamber.

17