Bakers Pride Oven MT-200 Troubleshooting, Problem, Probable, Remedy, Cause, Convection Oven

Convection Oven Maintenance

What to Do In Case of a Breakdown or Long Periods of Inactivity

1.Switch off the main electrical switch.

2.Set all control panel knobs to zero.

3.Inform technical assistance (only in case of a malfunction).

4.Clean the oven inside and out.

Troubleshooting

Refer to the table below for troubleshooting information.

PROBLEM	PROBABLE	REMEDY
	CAUSE
	Unit unplugged	Check the plug connection and reconnect if necessary
	Fuses	Check the fuses and replace them if necessary
Oven does not	Cables/terminal	Check the cables connection for loose wire and reconnect
	block	if necessary
turn on
	Switch	Check the switch and the voltage at the inlet and outlet.
		Replace switch if necessary
	Safety thermostat	Check the safety thermostat and push the red button
	Resistor contactor	Check the voltage at the inlet and outlet of the contactor
		and replace if necessary
Oven does not
	Heating element	Replace the heating element
warm up	burn out
		Check the temperature with a manual thermometer and if
		necessary replace the thermostat
Lights not lit	Switch/lights	Check the switch and the lights and replace if necessary
	Motor	Check the voltage at the inlet and out-
Motors do not	contactor/Motor	let of the contactor. Check the motor and replace the
work		contactor or the motor
		if necessary
	Safety thermostat	Push the red button on the thermostat
Oven suddenly		Check the fuses and replace them if necessary, if the
stops	Short circuit	failure persists check all parts with an appropriate tester in
		order to find which is the part to replace

14