Repair Procedures, Replacement of Motors | Bakers Pride Oven MT-200

Convection Oven	Maintenance

Repair Procedures

Replacement of spare parts must be performed exclusively by qualified and

AUTHORIZED personnel.

Turn the main switch OFF and unplug the convection oven before carrying out any spare parts replacement.

Replacement of Motors

It is necessary to remove the back by removing the 4 fastening screws “A” and the 4 screws “B” that support them.

15

Image 17

Bakers Pride Oven MT-200 service manual Repair Procedures, Replacement of Motors

Contents

Convection Oven Limited ONE Year Warranty Warranty Information Table of Contents Introduction Safety PrecautionsSafety Signs and Messages Technical Data Power Supply Terminal BoardSafety Standards Data Plate General Instructions for Use Controls and IndicatorsOperation Start-Up and Use Switching Off Safety Standards InstallationEnvironmental Standards Transport and Unpacking Installation Instructions Electrical Connections Convection Oven Installation Oven Chamber Safety Thermostat Automatic Safety and Control Devices of the OvenProtection of the Auxiliary Electrical Circuit Protection of the Chamber Fan Routine Maintenance Maintenance Oven Chamber Cleaning Cleaning the Fan Cleaning the Door Glass Problem Probable Remedy Cause Troubleshooting Replacement of Motors Repair Procedures Bulb, Heating Element and Motor Fan Outer Coverings30W Motor Heating Elements Chamber Face Gasket Replacement of Chamber Light and Glass GasketElectro-Mechanical Controls Replacement Parts POS Code BKI # Description Wiring Diagrams Convection Oven Box 80400, Simpsonville, S.C -0400, USA LI0131/0808