Installation Set Up
4 | INSTALLATION SET UP |
|
Access to controls
Opening procedure :
During the projector set up and installation it is neces- sary to open the top cover.
To gain access, procede as follow :
*Turn both lock screws with a screwdriver or a coin counter clockwise.
*Lift up and pivot the top cover.
*Support the top cover with the hand, no support is incorporated.
During some installations it will become handy to remove the top cover totally.
Therefore,
- pivote the top cover ± 60°
-push the top cover to the front side of the projector until it jumps out of its hings.
-Turn the top cover till 90° and lift it up.
Hook the top cover into the cabinet hinges. Pivot the top cover 30° and pull it backwards until it fits in the hinges. Close the cover and secure the lock screws by turning clockwise with a screwdriver or coin.
5975987A BARCODATA 708 260597 |
| |
|
