Cleaning
112 Nio® medical display systems
inert gas that acts like compressed air for a quick and safe
removal of dust particles and other dry contaminants on the
surface of the lcd panel or the glass panel.
Attention: The dust remover contains a liquid gas. If you
shake the can or move the can too fast while spraying, you
may blow drops of liquid on the panel surface!
If this is the case, clean the panel as described below.
2. If the LCD panel is dirty or wet, take a lint-free, nonabrasive
cloth and lightly moisten the cloth with a solution of 25%
Isopropyl Alcohol (IPA) and 75% de-ionized or distilled water.
E.g.: Cleareen, a product of Certified Laboratories.
3. Gently clean the panel with the moist cloth.
4. Take another clean, dry, soft, lint-free cloth and gently wipe
the glass dry.
Cabinet
• Clean the cabinet using a recognized cleaning product for
medical equipment. The cloth you use must be moist, not
wet!
• Repeat with water only and wipe dry with a dry cloth.
• The cabinet has been tested for resistance to the following
products:
Cidex, Betadine, Alcohol (Isopropyl and Ethyl), Ammonia-
based cleaners (Windex) and Aquasonic Gel.