Barco E-2620, E-3620 - page 50

Windows 2000 BarcoMed Nio software installation
50 Nio® medical display systems
Figure 23
Click “OK” to install the new driver. If you don’t want to
replace the exiting driver, click “OK” and then click
“Cancel”.
7. Your selection on the "Enable DualView" screen (figure24
below) determines if DualView is enabled or not. DualView
allows a dual head display controller to display two separate
desktops, one for each display instead of a single virtual
desktop that spans across both displays.
Figure 24
The difference between running with DualView enabled or
disabled is shown in figures 25 and 26 on page 51. If you
wish to enable DualView “check” the checkbox next to
"Enable the DualView device?", and click "Next". If you do
not wish to enable DualView “clear” the checkbox next to
"Enable the DualView device?", and click "Next" to continue.