Driver re-installation, updates or removal
124 Nio® medical display systems
doesn’t start within one minute, browse the contents of your
BarcoMed Nio Software CD and double click on the file:
“Setup.exe” to start the wizard.
2. The BarcoMed Product Installation Wizard will display its
welcome screen.
3. Make certain that the checkbox next to the driver is checked
and that all other checkboxes are unchecked (figure 60
below). Click “Install” to continue.
Figure 60
4. Click “Next”.
5. On the next screen (see figure 61 on page 125), check the
checkbox next to “Uninstall this device” and click “Next” to
continue.