Barco 3G/HD/SD-SD, HD/3G SDI Switching time, Configuring protocol options, Tcp/Ip, RS232

MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1

3.5Switching time

Switching is performed according to the detected sync reference signal. Switching time is determined by the synchronization signal that feeds the router. This is useful when the video signal has the same format as the synchronization signal. Supported formats are: PAL, NTSC, 750/50p, 750/60p, 1125/50i and 1125/60i.

3.6Configuring protocol options

TCP/IP

This is the default option for the Barco MatrixPRO-II HD/3G SDI routers. Selecting this protocol disables the RS-232 port of that device.

RS232

The serial protocol can be selected from the configurator software. Selecting the RS232 protocol disables the Ethernet port of that device.

Default IP Address: 192.168.0.245 - Port: 4381

RS-232 parameters:

-Bit rate: 19200 bit/s

-Data bits: 8

-Stop bits: 1

-Parity: no parity

Connection to the router will be lost after 20 seconds of inactivity

MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1

19