Barco 3G/HD/SD-SD, HD/3G SDI user manual Request X-Point Status, Echo

MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1

Asingle X-point Take command can switch multiple X-points. You will however receive one response for each X-point that is switched.

Example:

Command	Echo	Desired action
X l1 1 12	X l1 1 12	Switch input 1 to output 12 in level 1

B.2 Request X-Point Status

This command is used to requests the X-point status of all destinations on a specified level.

Command:

s l<level1> [*CC]<LF><LF>

Response:

%<LF>

x l<level> <src> <dest><LF>

[x l<level> <src> <dest><LF> …]

[*CC<LF>]

<LF>

Example:

Command	Echo	Desired action
s l1	X l1 15 0	Report x-point status in level 1
	X l1 15 1
	X l1 15 2
	X l1 15 3
	X l1 15 4
	X l1 15 5
	X l1 15 6
	X l1 15 7
	X l1 15 8
	X l1 15 9
	X l1 15 10
	X l1 15 11
	X l1 15 12
	X l1 15 13
	X l1 15 14
	X l1 15 15

MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1

31