Barco 3G/HD/SD-SD, HD/3G SDI Sync, Loop, NCB IN/OUT Ethernet, Power a, Power B, Configuration

MatrixPRO-II 3G/HD/SD-SDI Routers		Rev. 1.1
Field selectivity:	Field 1.
Timing range:	∙ SD, PAL: within clock-intervals (27MHz) 565 – 835 line 6

∙SD, NTSC: within clock-intervals (27MHz) 565 – 835 line 10.

∙HD Tri-Level: 1280x720: within clock-intervals (148.5MHz) 455 – 780 line 7

∙HD Tri-Level: 1920x1080: within clock-intervals (148.5MHz) 625 – 1070 line 7.

2.5Connection details

The MatrixPRO-II routers have the following service connections on the rear of each product:

SYNC:	Synchronization signal (in). Black burst/composite/tri-level sync
	reference input with passive loop-through for vertical interval
	switching.
LOOP:	Synchronization signal (out). Loop-through of SYNC input.
NCB IN/OUT	N/A.
ETHERNET:	10/100Base-T Ethernet bus for external router control.
RS 232:	RS-232 for external control protocols.
POWER A:	±15VDC power connector.
POWER B:	±15VDC power connector, redundant supply.
CONFIGURATION:	Configurations switch. See Chapter 3 for further descriptions.

2.5.1 Power Supply pinout

The DB9 power pinout for MatrixPRO-II routers is as follows;

Pin #	Description
1	GND
2	Not connected
3	Not connected
4	+15VDC
5	Not connected
6	Not connected
7	Not connected
8	-15VDC
9	Not connected

MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1

13