6. Getting used to the Menu Structur e

6. GETTING USED TO THE MENU STRUCTURE
Overview
• How to start up the menus
• Using the menus
• Adjusting a control in a Slider box

6.1 How to start up the menus

Box menu structure
The Solaris LC40 has a box based menu structure with a parent - child relationship. When selecting an item in parent menu box
(higherlevel) it opens a child menu box (lower level) in which you can make other selections or it activates an adjustment.
How to start up
1. Press ENTER or ADJUST on the RCU
Or,
presson thethumb w heel on the back side of the panel. (menu 6-1)
Solaris LC40
Select input
Image settings
Audio settings
PiP settings
Compact PC Control
Advanced settings
Standby
Back
Menu6-1

6.2 Using the menus

Layout
Non selectable items are grayed out in the menuboxes. When scrolling through the menu box content, the cursor jumps over the
grayed out items.
Selectinganitem
1. Use the up or down arrowkeys on the RCU to select the desired item and press ENTERto select
Tip: When on the first item, push once on the up arrow key to select the last item in the list, or when on the last item (Back),
push the down arrow key once again to select the firstitem.
Or,
turnthe thumb w heel until the desired item is selected and press the thumb wheel.
Tip: Whenon the firstitem, turn the wheel left to arrive on the last item, or when on the last item (Back), turn the wheel a little
further to arrive on the first item.
Go one level up
1. Press EXIT
Or,
selectBack and press ENTER or press the thumb wheel.
Escape from the menus
1. Press ADJUST on the RCU.
Theexplanation of the menu structure in the n extcha pters will be done using the RCU. Of course, everything
is possible with the thumb wheel.
R5976672 SOLARIS LC40 13/01/2005 35