1. Safety Instructions
1.4 Safety on Cleaning

Cabinet

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
Tokeep the cabinet looking brand-new, periodically clean it with a soft cloth. Stubborn sta insm aybe removed with a cloth lightly
dampened with mild detergent solution. Never use strong solvents, such as thinner or benzine, or abrasive cleaners, since these
will damage the cabinet.

Display surface

Contamination of display surface. When display surface of LCD module is contaminated, pleasewipe the surface softly with
cottonswab or clean cloth. Ifit is not enough, please take it away with cellophane tape or wipe the surface with cotton swab or clean
clothcontaining benzine. In this case, please be careful so that benzine does not get in inside of LCD module, because it may be
damaged.
Waterdrop on LCD surface. Pleasedo not leave LCD module with water drop. When the display surface gets water drop, please
wipe it offwith cotton swab or soft cloth immediately, otherwise display surface will be deteriorated. If water gets in inside of LCD
module, circuit may be damaged.
1.5 Safety on Shipping

Original Shipping package

Save the original shipping packing material; they will come in handy if you ever have to ship one of your installed modules. For
maximum protection, repack your set as it was originally packed at the factory.
1.6 On installation site

Transportation

• Anytransportation of the unopened unit in its packaging should be done by two persons.
• Intransportation or storage of products in original packing, NEVER stack more than the number stated on the carton box. This
warning is also indicated on theside of the carton.
• Fortransportation or storage, observe the warnings and instructions on the side of the carton.

Nearby equipment

Ifair conditioning ducts or lamps, etc. arelocated near the installation site, the attendant dust, extreme temperatures, humidity, and
condensationm ay become sources of trouble. Please take sufficient steps to avoid this.

Safety locations

Donot install the unit where it may be easily touched or leaned against. Avoidlocations subject to high vibrations or severe impacts.
Mechanical stress. Please be careful not to apply strong mechanical stress like drop or shock to LCD module. Such stress may
causebreak of d isplayglass and Lamp or may be the cause for failure.
Pressureto display surface. Pleasebe careful not to apply strong pressure to display surface. Suchpressure may cause scratches
at surface or may be the cause of failure.
Protectionagainst scratch. Please be careful not to hit, press or rub the display surface with hard material like tools. In addition,
pleasedo not put heavy or hard material on display surface, and do not stack LC D modules. Polarizer at front surface can be easily
scratched.
Temperaturedependence of disp lay. Response speed (optical response) of LCD display is dependent on temperature. Under
lowtemperature, response speed is slower. Alsobrightness and chromaticity change slightly dependin go n temperature.

Remaining of image

Displayingth e same pattern for long time may cause remaining of image even after changing the pattern. This is not a failure but
will disappear with time.

Lightning conditions

• Considerexisting lightning and sunlight angles when creating the installation layout. Extremely bright lightning can reduce the
visibility and the qualityof th ed isplayed image.
• Inextremely bright surroundings, adjusting screen intensity may not result in perceptibly brightener images. Keepin mind that
extreme intensity settings can reduce system service life.
R5976672 SOLARIS LC40 13/01/2005 5