12. Advanced Settings
6. Enter the column number in which the display (tile) is situated.
Tiled setup
Tiled setup : [yes]
Complete setup has:
Rows: 3
Columns: 3
This panel is:
Row: 1
Colomn: 1
Back
Menu12-43
Tiled setup
Tiled setup : [yes]
Complete setup has:
Rows: 3
Columns: 3
This panel is:
Row: 1
Colomn: 1
Back
Menu12-44
1212 3
Image12-7

Practical example to set up the configuration.

• Startwith the first display and give it a IR address. Entera logical pin code for the IR unlockingand set the IR locking on.
Asthe PIN code contains four digits, use e.g. thefirst 2 digits to indicate the row and the second 2 digits to indicate the colomn.
• Setdisplay per display on the same IR address, enter the logical PIN code and set the IR locking on.
• Unlocknow the first display andset up the tile configuration and all other adjustments for that display. SetIR locking back on
ON and continue with the next display.

12.10Service

Overview
• Identification screen
• IR address
• Serial communication
• IR locking
• Restore Factory Defaults

12.10.1Identification screen

The display’s identificationscreen

The identificationscreen displays the display’s main characteristics.
These are :
• Display type
• IR address
• RS232 address
• Serial number of the display
• Run time since first start up
• Software version
R5976672 SOLARIS LC40 13/01/2005 77