12. Advanced Settings

How to change the backlight ?

1. Select Advanced Settings.
2. Press ENTER to activate.
The Advanced Settings menu will be displayed. (menu 12-21)
3. Select Display Settings.
4. Press ENTER to activate.
The Display settings menu will be displayed. (menu 12-22)
5. Select Backlight.
6. Press ENTER to activate.
As liderbar willbe displayed with the a ctual backlightlevel filled out.
7. Use ↑or ↓to adjust the backlight level to desired level.
Advanced Settings
Gamma
Color Temperature
Input Balance
Noise Reduction
Film mode detection [ON]
Video AGC
Display Settings
Installation
Service
Back
Menu12-21
Display Settings
Rotate : landscape
Backlight
Back
Menu12-22
12.9 Installation
Overview
• File Services
• When no Signal
• Language Selection
• Tiledsetup

12.9.1 File Services

12.9.1.1 Introduction to image files

Introduction

Animage file contains the main characteristics of a source (number of active lines,...). Thedisplays’s memory contains a list of files
correspondingto the most common s ources, these are the standard files (file extension= *.s). When a new source corresponds to
oneof these files, a customfile (file extension=*.C) is created and saved for futu re use.
Themaximum number of custom files that can be created is 63 ,the four last filesare systematically overwritten.
Whenthere is a little difference, the file can also be loadedand then edited until the source specs are reached.
TheLoad Auto matic function creates automatically the best suited image file (custom file) for a new source.
72 R5976672 SOLARIS LC40 13/01/2005