Barco R9002327 Move the red CRT to, wards the green CRT, Loosen the four hexagon screws C, C

INSTALLATION ADJUSTMENTS

7-16

INSTALLATION$$￿$￿$%%￿ADJUSTMENTS&￿&&''''￿￿

Screws A, B, C and D (M4) : upper fixation latch. nutdriver 7mm. Screw A', B', C' and D' (M4) : lower fixation latch. nutdriver 7mm.

These screws fasten the cooling
house of the red tube.
Pivot the red CRT until the center of the
						CRT
red image coincides with the center of					PROJECTION		ANGLE
					ADJUSTMENT
the green image. If the angle of the red
CRT is corrected, tighten		the	four
bolts.
ENTER continues to blue and green
crosshairs.
					Align crosshairs
red	crosshair				<ENTER> continue
					<EXIT> to return
green crosshair
Move the red CRT to-
				EXIT will return to CRT projection angle
wards the green CRT				adjustment.
				Loosen the four hexagon screws C, C',
red crosshair				D and D', upper and lower fixation latch.
green		crosshair
Move the red CRT
to	the	outside,
away		from	the
green CRT						5975069ABARCOVISION708200498