11. Lamps Menu

11.3 Mode

Single lamp mode

Theprojector will always switch to the lamp with the shortest runtime when the difference between the runtimes of lamp 1 and lamp
2reaches 100 hours, switching from one lamp to another happe ns only at switching on of the projector and not during operation.
Whenthe lamp fails or reaches its maximum r untime the projectorswitches a utomaticallyto the oth erla mpw ithout interrupting the
projection. The failure is logged and the lamp will never be initialized in the future.
Image11-3
Singlemode operation: switchingprinciple

Dual lamp mode

Both lamps are working.
When onelamp fails, the projector continues the projection using the remaining lamp.

How to select the lamp mode ?

1. Press MENU to activate the menu bar.
2. Press →to select the Lamps item. (image 11-4)
3. Press ↓to pull down the Lamps menu.
4. Use ↑or ↓to select Mode.
5. Press →to pull down the menu.
6. Use ↑or ↓to select the desired mode.
Single Only one lamp is ignited.
Dual Both lamps are ignited.
7. Press ENTER to confirm.
A bullet shows the active mode.
106 R5976816 RLM R6+ PERFORMER 02/06/2006