13. Display Setup
13.7.3 ScenergiX overlap zone (horizontal scenergix)
Definitions
Image13-14
Scenergixset up
Overlap : number of pixels that overlap
Horizontalresolution of 1 projector : 1024for Graphics versions, 1280 for Reality versions, 1400 fo rSXG Ap rojectors.
Totalhorizontal screen resolution : [(horizontal resolutionof 1 projector) x 2] minus overlap.
Horizontal Resolution source : number of active pixels of the source.
Adjustment of Active pixels (Pact)of the first projector
1. Go to File –> Edit menu of first projector.
2. Enter value for horizontal active (= Pact) as follows :
Pact= [(Horz. resolution of 1 projector)/(Totalhorz. screenresolution)] x (horz. resolutionsource)
3. Horizontal start (= Pstart) remains thesame.
Adjustment of Active pixels (Pact) ofsecond projector
1. Go to File –> Edit menu of second projector.
2. Enter value for horizontal active (= Pact) as follows :
Pact= [(Horz. resolution of 1 projector)/(Totalhorz. screen resolution)] x(horz. resolution source)
3. Horizontal start (=Pstart) = original start + [(Horz. resolutionsource) minus (newly calculated Pact)]
Example
Horizontal resolution source : 1600 pixels
horizontal resolution projector 1 & 2 : 1024 pixels
Overlap : 100 pixels
Totalhorizontal screen size in pixels : 1948 pixels
Pact projector 1 = [(1024 / 1948)] x 1600 = 841 pixels
Pact projector 2 = [(1024 / 1948)] x 1600 = 841 pixels
Pstart projector2 = Pstart projector 1 + (1600 – 841)
R5976816 RLM R6+ PERFORMER 02/06/2006 125