6. Source selection
3. Use ↑or ↓to select one of the different sources (Press →to pull down if the item has a submenu).
4. Press ENTER to confirm your choice.
On the screen appears now the selected source with at the same time for a few seconds a text box with source information.
(image 6-1)
Video source 1
Video
Video625.c06
Image6-1
Sourceindication
6.4 Selecting a data source on the 5-cable input

What can be connected to the 5-cable input

The followingsource can be conn ected to the 5-cable input in normal mode:
•DataonBNC’s
• Component Video
•RG(s)B
Theposition of theicon “1” will always indicate which BNC configuration is selected.

How to set the correct source

1. Press MENU to activate the menu bar.
2. Press ↓to pull down the Source Selection menu.
3. Use ↑or ↓to select one of the 3 possible sources. (image 6-2)
When to select :
DATAon BNC’s When a data signal is connected to the BNC’s
ComponentVideo Whena video signal of the type (PR/Y/PB) is connected on the BNC’s
RG(s)BVideo WhenRGB video signal with S ync on green or sync on H is connected on the BNC’s.
Thissignal is routed to the video circuit and is projected in a Video Window.
Image6-2
Whensele cting “1” with the remote control, the predefined source type will be displayed.
52 R5976816 RLM R6+ PERFORMER 02/06/2006