12. Image Files Men u
Image12-5
Edit custom file
Video625.c01
Video625.c02
Active files:
Video625.c01
Image12-6
Edit custom file
Name
Horizontal:
Vertical:
680
20
0
560
8
576
720
Advanced
Video625.c01
total
active
start
period
total
active
start
Image12-7
It is recommended to use the default values.
12.6.2 Correct file parametersWhat is already available during start up ?
During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are
automaticallymeasured and filled in. Thesevalues will be available when starting up the EDIT procedure of an active file.
Adjustable items
• Activehorizontal pixels : determine the width of the window on the screen. This value is normally given in the source specifi-
cations. If not, adjust until full image is displayed (no missing pixels).
• Horizontalstart in pixels : number of pixels between the beginning of the input signal and the startof the video information in
the signal.
• Horizontalperiod in ns : when active file, the correct value will be filled out.
• Activevertical lines : number of horizontal lines determining the height of the projected image. this value is normally given in
thespecification of the source. If not, adjust until full image height is displayed (no missing lines).
• Verticalstart in lines : numberof lines between the start of the input signal and start of the image on the screen.
12.6.3 Advanced video settings
Overview
Whena video source is selected, the advanced button enables the advanced se ttingsfor that video source.
R5976816 RLM R6+ PERFORMER 02/06/2006 113