Barco R9010270 2. INSTALLATION GUIDELINES

2. Installation Guidelines

2. INSTALLATION GUIDELINES

Overview

• General

• Projector Configuration

• Lenses

• Battery Insertion in the Remote Control

• Stacking projectors

• Rigging points and accessories

Carefulconsideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to

the optimum use of the projection system.

Max. ambient temperature : 35°C or 95 °F

Min. ambient temperature : 10°C or 50°F

Theprojector will not operate if ambient air temperature falls outside this range (10°C- 35°C or 50°F-95°F).

Storage temperature: -35°C to +65°C (-31°F to 149°F)

Storage: 0 to 98 % RH Non-condensing

Operation: 0 to 95 % RH Non-condensing

Donot install the projection system in a site near heat sources such as radiators or air ducts, or in a place subject to direct sunlight,

excessive dust or humidity. Be aware that room heat rises to the ceiling; check that temperature near the installation site is not

excessive.

Aproject ormust always bemounted in a manner which ensures the free flow of clean air into the projectors ventilation inlets. For

installationsin environments where the projector is subject to airborne contaminants such as that produced by smoke machines or

similar(these deposit a thin layer of greasy residue upon the projectors internal optics and imaging electronic surfaces, degrading

performance),then it is highly advisable and desirable to have this contamination removed prior to it reaching the projectors clean

airsupply. D evices or structures to extract or shield contaminated air well away from the projector are a prerequisite, if this is not a

feasiblesolution then measures to relocate the projector to a clean air environment should be considered.

Onlyever use the manufacturer’s recommended cleaning kit which has been specifically designed for cleaning optical parts, never

useindustrial strength cleaners on the projector’s optics as these will degrade optical coatings and damage sensitive optoelectronics

components. Failure to take suitable precautions to protect the projector from the effects of persistent and prolonged air contam-

inants will culminate inextensive and irreversible ingrained optical damage. At this stage cleaning of the internal optical units will

be non-effective and impracticable. Damage of this nature is under no circumstances covered under the manufacturer’s warranty

andmay deem the warranty null and void. Insuch a case the client shall be held solely responsible for all costs incurred during any

repair. It is the clients responsibility to ensure at all times that the projector is protected from the harmful effects of hostile airborne

particlesin the environment of the projector. Themanufacturer reserves the right to refuse repair if a projector has been subject to

wantful neglect, abandon or improper use.

R5976816 RLM R6+ PERFORMER 02/06/2006 11