
8. Image Menu
How to change the Phase ?1. Press MENU to activate the menu bar. (image 8-10)
2. Press →to select the Image item.
3. Press ↓to pull down the Image menu.
4. Use ↑or ↓to select settings.
5. Press →to pull down the menu.
6. Use ↓or ↑to select Phase.
7. Press ENTER .
A slider box appears.
8. Use ←or →to change the Phase and refine the jitter.
Or,
clickin the input box and enter the d esired value with the numeric keys.
Note: Don’tmix up with wrong number of total pixels. Ifthe jitter doesn’t disappear with the phase adjustment, check the total
numberof pixels. (Bestimage = pixel on pixel off pattern. Forexample: shutdown screen of a PC)
Image8-10
8.2.8 Noise reductionAbout Noise reductionReduces noise and pixel jitterin all video sources.
How to change the Noise reduction ?1. Press MENU to activate the menu bar. (image 8-11)
2. Press →to select the Image item.
3. Press ↓to pull down the Image menu.
4. Use ↑or ↓to select settings.
5. Press →to pull down the menu.
6. Use ↓or ↑to select Noise reduction.
7. Press ENTER .
A slider box appears
8. Use ←or →to change the noise level.
The higher the value, the higher the noise reduction.
Or,
clickin the input box and enter the d esired value with the numeric keys.
68 R5976816 RLM R6+ PERFORMER 02/06/2006