THE WALL-MOUNT™ STEP CAPACITY AIR CONDITIONERS
Integrated Part Load Value (IPLV) Efficiency Up To 15.2 BTU/WATT
WA3S – WA5S Right Side Control Panel
WL3S – WL5S Left Side Control Panel |
|
3 to 5 Ton (35,400 to 56,500 Btuh) | 60Hz |
R-410A
The Bard WA/L "S" Series is the world's most energy efficient wall mounted air conditioner featuring a
The Bard
Engineered Features
Simple thermostatic control seamlessly stages the compressor and indoor airflow rate between high and low capacity operations without cycling the compressor. This helps to maximize comfort, humidity control, energy efficiency and overall reduction in compressor cycling for improved system life.
Compressor:
Copeland
Designed with
ECM Indoor Blower Motor:
Features a variable speed motor providing
Aluminum Finned Copper Coils:
Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency.
Twin Blowers:
Move air quietly. All models feature variable speed blower motors providing automatic airflow adjustment for high static or free blow
Foil Faced Insulation:
Standard on all units.
Start Kit:
A PTCR compressor start assist (Positive Temperature Coefficient Resistor) is standard on all
Compressor Control Module:
Liquid Line Filter Drier:
Standard on all units. Protects system against moisture.
High & Low Pressure Switches are
Standard on all units.
Crankcase Heaters:
Factory installed crankcase heaters are standard on all models. This helps to insure ease of start at low temperatures and improves compressor life.
Phase Rotation Monitor:
Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected.
Galvanized 20 Gauge Zinc Coated Steel Cabinet:
Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM
Galvanized 16 Gauge Zinc Coated Unit Base:
The unit base is treated with the same paint coatings as the cabinet above, insuring years of service without visible corrosion.
Drain Pan:
The evaporator drain pan is constructed of stainless steel material for maximum corrosion resistance.
Electrical Components:
Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch.
Electric Heat Strips:
Features line break automatic limit and dual backup safety controls. Heater packages can be factory or field installed for all models.
Filter Service Door:
Separate service door provides easy access for filter change.
Are standard equipment.
Condenser Fan and Motor Shroud Assembly:
Slides out for easy access.
Circuit Breakers/Rotary
Disconnect:
Standard on all versions of single (230/ 208 volt) and three phase (230/208 volt) equipment. Rotary disconnects are standard on all versions of three phase (460 volt) equipment.
Slope Top:
Standard feature for water
Full Length Mounting Brackets:
Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation.
Top Rain Flashing:
Standard feature on all models.
•Complies with efficiency requirements of ANSI/ASHRAE/IESNA
•Certified to ANSI/ARI Standard
•Intertek ETL Listed to Standard for Safety Heating and Cooling Equipment ANSI/UL 1995/CSA 22.2 No.
•Commercial Product - Not intended for Residential application.
Form No. | |
Supersedes | |
Page | 1 of 12 |