BENCHMARK No.
5 1
1 1 8
1
1
C O L L E C T I V E M A R K
GAS BOILER COMMISSIONING CHECKLIST
BOILER SERIAL No. |
|
|
| NOTIFICATION No. |
|
| |
CONTROLS To comply with the Building Regulations, each section must have a tick in one or other of the boxes | |||||||
| TIME & TEMPERATURE CONTROL TO HEATING |
| ROOM T/STAT & PROGRAMMER/TIMER | PROGRAMMABLE ROOMSTAT | |||
|
| ||||||
| TIME & TEMPERATURE CONTROL TO HOT WATER |
| CYLINDER T/STAT & PROGRAMMER/TIMER | COMBI BOILER | |||
| HEATING ZONE VALVES |
|
| FITTED | NOT REQUIRED | ||
| HOT WATER ZONE VALVES |
|
| FITTED | NOT REQUIRED | ||
| THERMOSTATIC RADIATOR VALVES |
|
| FITTED |
|
| |
| AUTOMATIC BYPASS TO SYSTEM |
|
| FITTED | NOT REQUIRED | ||
|
|
|
|
|
|
|
|
FOR ALL BOILERS CONFIRM THE FOLLOWING
THE SYSTEM HAS BEEN FLUSHED IN ACCORDANCE WITH THE BOILER MANUFACTURER’S INSTRUCTIONS?
THE SYSTEM CLEANER USED
THE INHIBITOR USED
FOR THE CENTRAL HEATING MODE, MEASURE & RECORD
GAS RATE |
| m3/hr |
BURNER OPERATING PRESSURE (IF APPLICABLE) |
| N/A |
|
| |
CENTRAL HEATING FLOW TEMPERATURE |
|
|
CENTRAL HEATING RETURN TEMPERATURE |
|
|
ft3/hr
mbar
°C
°C
FOR COMBINATION BOILERS ONLY
HAS A WATER SCALE REDUCER BEEN FITTED? | YES | NO |
WHAT TYPE OF SCALE REDUCER HAS BEEN FITTED?
FOR THE DOMESTIC HOT WATER MODE, MEASURE & RECORD
GAS RATE |
| m3/hr |
MAXIMUM BURNER OPERATING PRESSURE (IF APPLICABLE) |
| N/A |
|
| |
COLD WATER INLET TEMPERATURE |
|
|
HOT WATER OUTLET TEMPERATURE |
|
|
WATER FLOW RATE |
|
|
ft3/hr
mbar
°C
°C
lts/min
FOR CONDENSING BOILERS ONLY CONFIRM THE FOLLOWING
THE CONDENSATE DRAIN HAS BEEN INSTALLED IN ACCORDANCE WITH |
|
THE MANUFACTURER’S INSTRUCTIONS? | YES |
FOR ALL INSTALLATIONS CONFIRM THE FOLLOWING
THE HEATING AND HOT WATER SYSTEM COMPLIES
WITH CURRENT BUILDING REGULATIONS
THE APPLIANCE AND ASSOCIATED EQUIPMENT HAS BEEN INSTALLED AND COMMISSIONED
IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS
IF REQUIRED BY THE MANUFACTURER, HAVE YOU RECORDED A CO/CO2 RATIO READING? N/A | YES |
| CO/CO2 RATIO |
THE OPERATION OF THE APPLIANCE AND SYSTEM |
|
|
|
CONTROLS HAVE BEEN DEMONSTRATED TO THE CUSTOMER |
|
|
|
THE MANUFACTURER’S LITERATURE HAS BEEN LEFT WITH THE CUSTOMER |
|
|
|
COMMISSIONING ENG’S NAME PRINT |
|
| CORGI ID No. |
| |
SIGN |
|
| DATE |
| |
46
