Siting the Boiler, Water Connections | Baxi Potterton BBU 15 HE

Fixing Slot

Fig. 35

Condensate

Discharge (remove

plug before connection)

ReturnFlow

Fig. 36

Fig. 37

1 2

7.0Installation

7.3Siting the Boiler

IMPORTANT - This product should be lifted and handled by two people. Stooping should be avoided and protective equipment worn where necessary. Carrying

&lifting equipment should be used as required, e.g. when installing on another floor.

1.Lift the boiler from the packing base and place into the opening.

2.Align the boiler centrally as far back in the opening as possible, and ensure the distance between each side and the opening is equal. Check that the boiler is level.

3.Mark the hearth through two of the slots in the base (Fig. 35). Remove the boiler and drill the hearth. Insert suitable plugs. Replace the boiler & check the alignment within the opening. Secure the boiler with suitable screws.

7.4Water Connections

1.The boiler has one return and one flow connection. The flow is the upper connection. It is essential the flow and return pipes are connected correctly (Fig. 36).

7.5Gas Connection

1.Connection to the gas supply is a 15mm compression fitting on the gas cock. The gas supply pipe must be routed from the right hand side.

2.The positioning of the gas supply pipe must not restrict the servicing of the boiler or installation of the firefront.

7.6Electrical Connection

1.The boiler requires an electrical supply from the heating controls system.

WARNING: The appliance must be earthed.

The input cable for the appliance should be 0.75mm2 to IEC Code 227 (heat resistant). The system external controls and the boiler must be supplied by the same isolator. The boiler MUST NOT be connected to the

same supply as the firefront as their fuse ratings are different.

7.7Making the Electrical Connection

1.Take the 5 pin plug from the boiler fitting kit, remove the securing screws and hinge the cover open.

2.Route the mains inlet cable under the cable clamp and connect Permanent Live, Neutral &Earth to 3, N &

respectively. Ensure that the Earth lead is longest.

3.Connect the switched output from the system external control system to terminal 1.

4.Refit the cover, tighten the screws to secure the cable and connect the plug to the one on the boiler.

BBU 15 HE specifications

The Baxi Potterton BBU 15 HE is a high-efficiency boiler designed to offer exceptional performance for both heating and hot water needs in residential settings. Known for its robust build quality and user-friendly features, this model is particularly favored for its versatility and reliability in various home environments.

One of the standout features of the Baxi Potterton BBU 15 HE is its compact size, making it suitable for installation in smaller spaces. Despite its small footprint, it delivers impressive outputs, making it ideal for homes with moderate heating demands. The boiler’s high efficiency rating ensures reduced energy consumption, leading to lower utility bills and a smaller carbon footprint.

Equipped with a powerful heat exchanger, the BBU 15 HE maximizes heat transfer, ensuring that households receive optimum warmth and hot water. With an output capacity of 15 kW, it can effectively heat a variety of living spaces while providing hot water on demand, making it a practical choice for families.

The boiler incorporates a number of advanced technologies that enhance its performance. One such feature is the built-in frost protection, which helps prevent the system from freezing during colder months. Additionally, the BBU 15 HE is designed for easy maintenance, featuring a simple access point for servicing, which can prolong the boiler’s lifespan and improve overall efficiency.

Safety is a top priority in any boiler installation, and the Baxi Potterton BBU 15 HE includes multiple safety features such as a pre-set temperature limit that prevents overheating and a pressure relief valve to manage excessive pressure within the system. These elements contribute to a safer home environment, providing peace of mind for homeowners.

Furthermore, the boiler is designed to operate quietly, minimizing disruptions in the home when heating systems are active. This is an important factor for many households where comfort is a priority.

In summary, the Baxi Potterton BBU 15 HE is a compact, efficient, and reliable boiler that provides an optimal solution for home heating and hot water needs. Its advanced features, safety systems, and user-friendly design make it a popular choice among homeowners, ensuring a cozy and comfortable living environment. Whether for a new installation or a replacement unit, this boiler stands out as a highly effective option in the market.

Baxi Potterton BBU 15 HE manual Siting the Boiler, Water Connections, Gas Connection

Models: BBU 15 HE