Beaumont Products MPEG - 1, MPEG - 2, MPEG - 4 Standard Administrative Settings

VBRICK ETHERNETV SET TOP BOX USERS GUIDE VERSION 3.6.9

Standard Administrative Settings

It is necessary to login before making changes.

Network Static IP Address

The EtherneTV Set Top Box comes configured

for DHCP and set in Local Mode. To change

to a static IP address, Use the Network:

Ethernet settings.



Uncheck the box for DHCP Enable.



Uncheck the box for DNS via DHCP.



Uncheck the box for Hostname via

DHCP.



Enter a Hostname, if desired.



Enter the static IP address, Netmask

and Gateway.



Apply c must be selected before the

changes will take effect.

Local Mode Settings

Use the Video: Setup settings to enable or

change these and other selections:

Boot Mode – Change the setting to:



Local



Local-Full Screen

Receive Address – The receive address or

URL of the desired video. There are six options

for stream type:

NOTE: It is possible to use a hostname or

numeric IP address wherever an <ipaddr> is

called for (only if the hostname is in the

DNS server).



Multicast MPEG-1 RTSP@MULTICAST_MPEG1://group:port/



Multicast MPEG-2 RTSP@MULTICAST_MPEG2_TRANSPORT://group:port/



Multicast MPEG-4 (a) Please refer to the release notes for information on how to FTP the

SDP file to the SET TOP BOX,

(b) RTSP@ISMA_SDP_FILE:///wfs/<path to file>,

e.g. RTSP@ISMA_SDP_FILE:///wfs/mpg/currentmp4.sdp



RTSP MPEG-1 for

Video on Demand

(EtherneTV VOD)

RTSP@KASENNA_MPEG1://<ipaddr>/program



RTSP MPEG-2 for

Video on Demand

(EtherneTV VOD)

RTSP@KASENNA_MPEG2_TRANSPORT://<ipaddr>/program



RTSP MPEG-4

Internet Streaming

Media Alliance (ISMA)

RTSP@ISMA://<ip addr>/program

(e.g. RTSP@ISMA://172.22.117.2/vbrickvideo1 or

RTSP@ISMA://172.22.119.119/Complete-Movies/enterprogramname)

