VBRICK ETHERNETV SET TOP BOX USERS GUIDE VERSION 3.6.9
Enter MCS Location
To configure the set top box to an MCS
address:
7
5
6
Under Configuration, Video, Setup:
Enter the MCS Location g
Enter the IP Address of the MCS h
Apply Changes i
After making all the required entries, select Apply to apply the changes. Changes are not
active until they are applied.
NOTE: Use the arrows above menu on left side of the screen to move backwards, or up
through screen levels and enter to select.
COPYRIGHT VBRICK SYSTEMS PAGE 16 NOVEMBER 10, 2003